RAW Plugin for Final Cut Pro

RAW Plugin for Final Cut Pro is plugin software for importing and editing Canon RAW(CRM) clips with Final Cut Pro, which runs on macOS systems made by Apple Inc.
Detailed information
Version 2.7.0 (macOS only)
Supported Products EOS R1, EOS C80, EOS C400, EOS R5 Mark II, EOS C70 (Firmware Ver.1.0.3.1 or higher), EOS C500 Mark II, EOS C300 Mark III, EOS C200, EOS C200B, EOS R5 C, EOS-1D X Mark III, EOS R3, EOS R5
Hardware Requirements (Mac) 1. Installation Requirements
The following software must be installed on the PC
- Final Cut Pro 10.4.9 or later

2. Supported OSes
Same as the support conditions of Final Cut Pro

3. Compatible PCs
Same as the support conditions of Final Cut Pro

CPU
Same as the support conditions of Final Cut Pro

GPU
Required operating environment
- Mac equipped with a GPU (or a built-in GPU) of VRAM 1GB or higher that supports Metal
*The following environment is required to be able to handle 5.5K RAW(CRM), 5.9K RAW(CRM) clips.
- Mac equipped with a GPU (or a built-in GPU) of VRAM 2GB or higher that supports Metal (except for NVIDIA GPU)
*The following environment is required to be able to handle 8K RAW(CRM) clips.
- Mac equipped with a GPU (or a built-in GPU) of VRAM 4GB or higher that supports Metal (except for NVIDIA GPU)

Recommended operating environment
- iMac Pro equipped with AMD Radeon Pro Vega 64

RAM
Same as the support conditions of Final Cut Pro

4. Display
Same as the support conditions of Final Cut Pro
Setup Please refer to the instructions below on how to download and install the software.
Exit all other applications when installing this software.

  1. Click the download button on this page to download the compressed file.
  2. Extract the downloaded compressed file on your computer. Double-click the extracted file to mount the disk image.
  3. Double-click the installer file in the disk image.
  4. Follow the on screen instructions to complete the installation.